X-II SERIES Calibrator

The X-II series Process Calibrator is a hand-hold, battery-powered instrument that measures and sources a variety of electrical parameters. It can be widely applied in industrial fields and laboratories.
Category:

Description

FEATURES
  • Split-screen Display
  • DC Voltage Measurement/Source
  • DC Current Measurement
  • DC Current Source
  • Resistance Measurement/Source
  • RTD Measurement/Source
  • Thermocouple Measurement/Source
  • Frequency Measurement/Source Counting Pulse
  • Transmitter Signal Simulation
  • Two-, Three- or Four- Wire RTD Measurement
  • Calibration Functions
  • (4~20)mA Loop Power Supply
  • Auto Ramping and Auto Stepping
  • Manual and Auto Cold Junction Compensating
  • Storage and Recall of 10 Setups
  • Auto Flash Terminals
  • Backlight LCD
  • Battery Gauge

Related Products

CXT Series Smart Transmitter

No rating
The CXT-III smart pressure transmitter utilizes a unique compositive monocrystalline piezoresistive sensor and the advanced cell design with state-of-the-art microprocessor technology, up to 0.04% accuracy for all calibrated spans, ±0.1% of upper range limit (URL) for 10 years, has a longer service life, the use of safe and reliable and convenient.

C1000 Single-loop Controller

No rating
The C1000 is a Single-loop Controller with 3 analog inputs, 1 analog output and 4 alarm outputs. Meanwhile, the C1000 provides RS-232C/RS-485 interface for digital communication and transmitter power supply.

E6500 Data Acquisition Unit

No rating
With analysis and statistic function of E6500 Data Acquisition Unit, energy efficiency analysis, quality management, batch management and event record etc. are available. It consists of 3 setpoint program control modules, 4 PID control modules, 6 ON/OFF control modules and 60 function modules. It offers various complex control strategies and complete data calculation and statistics. With RS-232C/RS-485 serials communication or the Ethernet interface, real-time monitor, remote diagnosis, settings management and history transfer can be fully utilized.

HD5500-EX Series Isolated Barrier

No rating
HD5500-EX series isolated barriers are designed explicitly according to latest national standard for protection of electrical signals located in hazardous areas. Installed in safe areas, HD5500-EX series Isolated barriers work in company with intrinsically safe instruments located in hazardous areas to guarantee a totally IS explosion protection system. With the inside signal transfer module, HD5500 series isolated barriers can also play the roles of RTD temperature transmitter, thermocouple temperature transmitter and mV transmitter, as well as repeater power supply, solenoid driver and so on. With whole series carrying approval mark of the National Supervision and Inspection Center for Explosion Protection and Safety of Instrumentation(NEPSI), HD5500-EX series Isolated barriers are suitable for interfacing solution between safe and hazardous areas ranking [Exia Ga]ⅡC. All the analogue input/output and digital input/output models have been assessed for use in a SIL3 safety function according to IEC 61508 by BUREAU VERITAS, while SIL2 for temperature converter models. Contact us to find the safety manual for reference if needed.

AR3100/AR4100 Operational Recorder

No rating
The AR3100/AR4100 is a high speed ,multi-function,smart recorder,with 60 mathematical functions, not only can accomplish statistics, count, interlock and timing control, but also can start/stop recording automatically. With 32-bit microprocessor, 5.6″ TFT LCD and 128MB inbuilt memory,the AR3100/AR4100 consists of 60 function modules, 12 analog inputs, 2 digital inputs, 2 pulse inputs, 4 analog outputs, 12 digital outputs and 100mA transmitter power supply. It offers data calculation, display, record, alarm, analytic reports, statistic reports and high-speed sampling period. With RS-232C/RS-485 serials communication or the Ethernet interface, real-time monitor, remote diagnosis, settings management and history transfer can be fully utilized.

SB3000-Ex Series Isolated Barriers

No rating
Installed in safe areas, SB3000-EX series Isolated barriers work in company with intrinsically safe instruments located in hazardous areas to guarantee a totally IS explosion protection system. With the inside signal transfer module, SB3000-EX series isolated barriers can also play the roles of RTD temperature transmitter, thermocouple temperature transmitter and mV transmitter, as well as repeater power supply, solenoid driver and so on.

CJT Series Smart Transmitter

No rating
CJT series smart transmitter is the field pressure instrument adopting the microprocessor as its core, which extends the communication and other functions on the basis of the traditional capacitance sensor technology. With the help of hand held communicator or other host computer adopting HART protocol, the bi-directional communication (data reading, writing and diagnosing) could be realized in the control room, transmitter field or any places connecting with control circuit. With CJT series smart transmitters, measurement of pressure, flow and liquid level etc., is available to meet a wide range of applications and requirements including petroleum, chemical industry, steel, electric power, environmental protection and so on.

R1000 Paperless Recorder

No rating
The R1000 is a 32-bit ARM microprocessor-based paperless recorder with a monochrome LCD. It offers up to 3 analog inputs and 4 alarm outputs. Meanwhile, the R1000 provides RS-232C/RS-485 interface for digital communication and transmitter power supply.

R5000 Paperless Recorder

No rating
The R5000 is a 32-bit ARM processor-based paperless recorder with a 10.4″ TFT color LCD. It offers up to 32 analog inputs, 8 analog outputs and 32 alarm outputs. Meanwhile, the R5000 provides the RS-232C/RS-485 communication interface, CF card or USB disk to connect with computer and transmitter power supply.